Project Managers Jacobs Zate


JACOBS ZATE is a world leader in Consultancy, Engineering and Management services for the design of Chemicals, Petrochemical, Oil & Gas, Refinery Units, Pipelines, Power and Infrastructures facilities. Continued motivated engineering professionals to participate in our design and Project Management activities. To augment our various Engineering Departments at our Saudi Arabia offices we wish to recruit professional personnel in our Process, Mechanical, Piping, Pipeline, Electrical, Instrumentation, Communication, Civil/Structural, 3D Design, Project Management and Project Services division as follows:

  • Project Managers
  • Project Engineers
  • Senior Principal Engineers
  • Senior Design Engineers
  • Engineers
  • Material Specialist
  • Senior Designers
  • 3D Designer
  • Planning/Cost Control Engineers
  • Procurement Manager
  • Equipment/Material Buyers & Expediters
  • Senior Estimators K-Base

Managers / Engineers shall have B.S degrees in their respective engineering disciplines with 10-15 years of relevant experiences. Designers shall have B.S/Diplomas in their respective disciplines with 8-15 years of relevant experiences. Hand-on experience in computer aided engineering and ability to interact with clients, vendors and contractors independently besides excellent interpersonal and communication skills. The company offers excellent work environment and professional growth opportunities.
Qualifying candidates who are looking for challenging opportunities shall furnish their detailed resumes including copies of qualification, work experience, recent photographs and desired remuneration etc: to or by fax 00-966-3-898-9911 or mail to P.O.Box 981, Al-Khobar 31952, Kingdom of Saudi Arabia. Please refer to company website for more information

  1. Dear Sir,

    I here by submitted their personal information for job in ‘JACOBS ZATE ENGINEERING’.
    I did have diploma of associate engineer in civil from recongnized institute and also have cetificate in computer added dsigning.So currently i am working with G3 Engineering consultants lahore as civil Inpector in OPF College at shekhupura last 1.5 yaers.Before this job i was work with comfofort architecht as Cad Operator.Pls consider my request for suitable job in engineering feild then cntact with me”+92 (322)4007645

  2. Please see below my CV and feel free to contact me for more information. Thanks

    Mob: 00966565852730
    email ID:

    Saudi Arabia:
    Mobile: 00966-5-65852730

    Mobile: 0091-9443767244


    Lakshmanan Kasinathan


    • Profile: Male , 54, Married
    • Nationality: India
    • Location: Jubail, Saudi Arabia (On Vacation now)
    • Position: Cost Control Engineer
    • Company: III Expansion U&O Project, SHARQ, Saudi Arabia

    POSITION SOUGHT Suitable Position such as Consultant / Advisor / Manager / Sr. Engineer in any Construction Project preferably in Oil & Gas / Petrochemical Industry in the Disciplines or Functions of Project Control, Cost Control, Project Planning, Change Management, Contracts Administration, Invoice Processing, Techno Commercial and Financial Project Feasibility Studies, etc for the Client / EPCM Contractor’s Organization..


    Feb 2008 – Present Sharq Jubail , Saudi Arabia
    Senior Cost Engineer
    For their 3rd Expansion Project (Above USD 4 Billions), I have been serving as the Senior Cost Engineer of Foster Wheeler Arabia Ltd for their Client’s U&O PMT Office. Then I was absorbed by the Client –Sharq directly with a view to closing out the project.
    1) I reviewed the Fiscal Performance of all Service Contractors (Contracts Management, EPC, Construction, and Support Services etc), Procurement of Bulk Materials and Equipment Suppliers, Vendor Service Providers etc. Validate and forecast their Cost Trends.
    2) I looked after Change Management – Field Instructions from Alerting stage till payment stage for all Contractors in close coordination with EPC Contractor in coordination with the concerned Sharq & EPC Contractor’s discipline personnel and Contracts Manager
    3) I processed all Invoices of EPC and Construction Contractors, Purchase Orders, Vendor Services etc for Payment in close coordination with EPC Contractor, Administration and Finance Departments
    4) I took charge of the Foster Wheeler Cost Engineer’s responsibilities when their Management Contract expired.
    5) I took charge of the Foster Wheeler’s Purchase Department, Contract Department and Cost control department Responsibilities when their EPC Contract expired.
    6) I closed out majority of the Purchase Orders, and Contracts as they were open when Foster Wheeler left. the Project.

    Sep 2007 – Feb 2008 SNC Lavalin Shay bah , Saudi Arabia
    Senior Project Control Engineer
    For the GOSP-4 Plant of Saudi Aramco, I worked as the Senior Project Control Engineer for SNC Lavalin (EPC Contractor. I looked after all the activities related to the Project Control such as 1) Management Information System Reporting to the Client, Canada Corporate Office, KSA head Office, etc. 2) Project Planning & Control of Project Performance, 3) Progress Measurement, and Invoice Processing, of various Construction Contractors, 4) Preparation of Invoice of EPC Contractor 4) Man Power Planning, Mobilization and Demobilization of Manpower related HR Functions at Site, 5) Contract Administration, etc

    Jan 2007 – Aug 2007 National Contracting Company Qurrayah, Abqaiq ,
    Saudi Arabia
    Head of Planning Department
    I worked as the Head of Planning Department for all their Projects (Mechanical, Electrical and Instrumentation) at Quarrayah Water Injection Plant Expansion Project of Saudi Aramco. I did the entire Project Planning and Scheduling for all the 3 projects – Mechanical, Electrical and Instrumentation. This was done in Primavera at level 5. Established the Planning Department, Documents Control, MIS Reporting System etc

    Jan, 2006 – Dec 2006 Project Consultant My Home, India
    Project Feasibility Consultant
    I did a couple of Pre Feasibility studies of Manufacturing Projects for various Customers in the Middle east. They are
    1) Manufacture of Lubricants in Jordan for a group of 4 Promoters belonging to UAE and Jordan
    2) Manufacture of Plastic Cards for Electronic Industries for a client in UAE

    I have done many similar Detailed Project Feasibility Studies earlier since 1984 for customers in India and Middle East Countries as a part of my Job as well as Part Time Job. Some of them, to name a few, are given below:

    1) Manufacture of Electrical Cables for Construction Industry, Domestic Cables (MV / LV etc)
    2) Manufacture of Steel Doors
    3) Manufacture of Aluminium Extrusion
    4) Manufacture of Air Conditioners
    5) Manufacture of HDPE / LDPE / LLDP / PP Plastic Liners and Woven Bags / Sacks
    6) Manufacture of High Pressure Molding – Castings for Automobile Industry
    7) Manufacture of Spring Mattresses
    8) Manufacture of Wooden Doors
    9) Manufacture of Gypsum Products and Works
    10) Manufacture of Products from Waste paper
    11) Manufacture of Extraction of Coir Fibers
    12) Manufacture of Bolts and Nuts
    13) Many Ship Breaking Industries for all in South India
    14) Many Expansion Projects of Kerala State Government Companies
    15) Many Revival of Sick Units in the Kerala State, India

    May 2004 – Dec 2006 Lootah Group of Companies Ajman , UAE
    CCC Controller
    I joined them as the GM for one of their Units manufacturing rigid PUF. As it was not economically viable, the unit was closed and then I worked as the Cost, Credit and Collection Controller for all their 18 Manufacturing Units. In addition I assisted the Chairman for Technical issues.

    Mar 2001 – Oct 2003 Intercoil International Co. LLC Dubai , UAE
    Factory Manager
    I looked after the entire Factory Management, 2 new Expansion Projects, Product Development, Production, Marketing and all related matters. I did all the Project work from the concept stage till implementation. The production and customer service were not affected in relocating the plant for even a single day. I handled a Fire Accident too immediately after my joining that lead to all these developments in a way. I developed our own new Technology, Product Mix, and Collaboration with American Company etc .I could thus put the company in the GCC Map and obtain the No: 1 Position in the Mattress Industry.

    Dec 1998 – Jan 2001 Al Jaber Est., Abu Dhabi, UAE
    Cost Controller
    I established a Costing System to scientifically decide the Pricing of their services of hiring more than 20,000 Heavy Equipment, vehicles, and machinery for both Internal and external purposes. I used to check the viability of Project Cost at the time of Bidding itself. I assisted the new projects in preparing the Primavera Schedules and Establishing Documents Control Department particularly the 2 projects – Storm Water & Sewerage Pipe Lines for a residential area – New Mussapha and Pipelines between ADNOC Terminal Um Alnar and Ruwais Refineries

    June 1978 – Dec 1998 Experience as an employee & Consultant in India
    Junior Engineer Trainee to Senior Manager
    I served as an employee as well as a Management Consultant in India during this period. Though I worked mainly in the Manufacturing Industry, I worked in Construction projects for New (Green Field), Expansion (Brown Field), Diversification, and Revival of Sick Units Projects. I did pre feasibility studies for the entire Kerala State Government Companies in India. I was in the Project Management of Client side always. The first one was a Manufacturing Plant for Polyester (INR1 Million in 1978 in Chennai) I was associated with the Asia’s then Biggest Integrated Ferrous Foundry Project (INR 2.8 Millions in 1983) right from its conceptualization stage till running the Plant. I was a project management Consultant to many individual Promoters / customers and Manufacturing Companies in India.

    Over the past more than 30 years I am well experienced in all stages of the Project’s Life Cycles – particularly the following:
    1) Initial Stage:
    • Corporate Planning – an expert – Introduced and implemented Corporate Plans in more than 100 companies in the state of Kerala, India
    • Identification Business Opportunities and Development
    • Including Green Field Projects, Brown Field Projects such as Expansion, Diversification, or even Revival of Sick Units
    • Pre – Feasibility Study – done more than 100 nos
    • Functions of Project Control, Project Planning, Scheduling, Cost Control, Budgeting, etc
    2) Planning Stage:
    • Project Planning using Primavera at various levels (up to Level 5 done)
    • Resource Planning – Manpower, Equipment, Materials, etc
    • Financial Planning – Budget, Cash Flows, etc
    • Risk Planning
    • Communication Planning
    3) Execution Stage:
    • Development & Monitoring of Deliverables
    • Progress Measurement for Invoicing as well as Physical Progress
    • Performance Reporting – MIS
    • Payment – Invoice Preparation, Invoice Processing etc
    • Contracts Management & Administration – as per the requirements of Standards like Company’s Standards, FIDIC (Red Book), JBIC, etc
    • Monitoring and Controlling of Performance by
    o Time Management
    o Cost Management
    o Procurement Management
    o Change Management
    o Issue Management
    o Risk Management
    o Communication Management
    o Periodical Reviews
    4) Closure:
    • Contract Closures
    • Project Closure
    • Documentation
    • Final Review

    7) Capacity:
    Worked as the Representative of Client, EPC or Construction Contractors as well as Management Consultant
    I am well versed in using the computer and the required softwares since 1978.
    Some of them I am currently using include the following skills
    • Windows Operating System
    • Project Planning Software like Primavera, MS Projects, Sure Track etc
    • Applications using the company maintained Databases in FoxPro, MySQL, Informix etc
    • ERP or any Proprietary or Custom Built Software
    • MS Office Suite (Eg: Excel, Word, Power Point etc)
    • Instant Messaging (eg: Lotus Notes)
    • Internet and Intranets
    • Web enabled Remote Access eg: Citrix
    I used to program in COBOL, FORTRAN, Basic etc in the olden days (80s). Now, I am very comfortable with Excel for the Data Base, Formulae, Query, and Routines etc to develop any software as per the requirement. When the system grows, beyond the usual Book Keeping and Operations Softwares, Propitiatory software integrating all and the new ones is required. I am very strong in Systems Integration for Computer Application as well as Administration because of my Qualifications and Experience. This way I have helped a few companies go in for an effective ERP Solution in India as well as UAE.
    I can handle all aspects of the management including Technical, Finance, Costing, Purchase, Stores, Personnel, Administration, etc to the highest quality of Professional Management. I have all the required Computer skills, Academic qualifications and rich, diversified Experience.

    I want to contribute to the growth of the Organization I serve and grow with it. I have so contributed to the highest level of Professional Quality, to organizations earlier in many areas in addition to the Project Management. Some of those areas are given below:

    Industrial Engineering, Productivity Improvement, Cost Control, Production Planning & Control, Management Information System. And Reporting, Corporate Planning, Shut Down Planning & Control, HR Management, Training, Industrial Labor Relations, Materials Management, Plant Management, Service Management, Work Shop Management, Credit Control, Collection, Project Feasibility Studies or General Management Position in Manufacturing Company, Heavy Equipment Company / Hiring Company.

    I have presented many technical papers and been a Guest Faculty to the Professional Institutions, Association, Councils, Academic Institutions etc in India


    Apr 1984 – Apr 1985 Mewes Systems Frankfurt , Germany
    Strategy, MBA, I Grade

    Jun 1973 – Jun 1978 REC Madras University , India
    BE (Industrial Engineering), University II Rank Holder

    Jun 1971 – Jun 1973 SSAC Madurai University , India
    Science, Other, College First – State First in the Language


    • English Fluent

    • Tamil Native

    • Malayalam Fluent

    • Hindi Working knowledge
    • Arabic Working knowledge

    Personal Information
    Name: Kasinathan Lakshmanan
    Birth Date: 8th July 1956
    Nationality: India
    Visa Status: Residency Visa (Non-Transferable)
    Driving License: India; United Arab Emirates

  3. Fida Hussain Samo,
    B.E (Civil), M.E (Structure)
    Senior/Lead structural design engineer-Bridges, Industrial plants, Metro, railway, airport, Towers.
    16 years experience in designing & coordination, design reviewing, supervision & management.

    Current company Dar al Riyadh Engineering & Architectural consultant Saudi Arabia
    Previous company WS Atkins Sharjah branch U.A.E.
    Present position Senior/Lead structural design engineer
    Profession Civil & structure
    Key Qualification M.Eng (Civil-Structural Engineering), B.E, (Civil)
    Specialization Bridges, Flyovers, underpasses, railway infrastructures, Airports & towers,
    Experience Design of Pre-stress, Post tensioning concrete, reinforced concrete & steel structure,
    Nationality Pakistan
    Date of Birth 5th May 1972
    Driving license Qatar & Saudi Arabia.
    Passport No: AH6896342
    Place of issue Karachi-Pakistan
    Valid Date: 02 March 2015
    Cell Phone +966-593512330
    Email address: fida_72f


    August 1995 N.E.D University of Engineering and Technology,
    B.E (Bachelor in civil Engineering) passed in Aug: 1995
    First division (82%-Under top 15 position)

    Feb 2000 N.E.D University of Engineering & Technology,
    M.E (Masters in civil-Structural Engineering) passed in 2000
    GPA 3.62/4 (First position)

    Looking to join a progressive, reputed multinational consulting company that offers a challenging and professionally fulfilling environment as a leading role in the structural design team to meet future challenges & with a view to use my wide experience for the benefit of the organization.

    Professional & technical specialties,
    • Conceptual planning for structural schemes, prepare design criteria, proven analysis/design experience from preliminary to detail design of structural schemes on various major gulf projects. Ability to work as a lead design engineer in the design, reviewing design calculation, shop drawings, material, method statement & coordination to the all types of materials like reinforced concrete, Steelwork, masonry load bearing structures.
    • Extensive & varied experience in the design, design & drawings review, assessment, coordination with other disciplines & construction management in various fields like Highways Bridges, flyovers, underpasses, buildings projects ranging from tallest buildings, airports terminal building, steel aircraft hangers, hotels, stadiums, hospitals, cardiac center, power plants, cement manufacturer plants, substations, large span industrial reinforced concrete, steel structural, precast & posttensiong concrete buildings, railway infrastructures including cut & cover tunnels, box culverts, underground substations.
    • Reviewing the contractor’s design, design change review, shop drawings, materials specifications review, method statement, soil investigation report & its report to assess the properties of soil & safe bearing capacity & cement type used, supervise testing & commissioning at site.
    • Liaising with the contractor during their design development to ensure they comply with the client’s requirements.
    • Responsible of Peer review & solve technical issues associated with lateral stability, wind & seismic analysis of towers.
    • Deep basements including temporary & permanent civil works.
    • Design & supervision of the load arrangement of static & dynamics pile load test using ultrasonic pulse velocity method.
    • Design & detailing steel building systems, large spans warehouses, car parking shades, large span steel trusses, large span post tensioning girders, precast concrete wall panels, boundary wall panels, structural steel supports of stone cladding, curtain walls & skylights.
    • Dynamic Analysis & design of machine foundation, generator & turbine foundation & the foundation under the PEB portal & gable steel frame against the gravity & & lateral loads.
    • Knowledge of shoreline protection, sheet piling, piling, deep retaining walls.
    • Design of pile raft foundations under the towers & batter piles under high tension power poles.
    • Analysis & design of platforms, pipe racks, machine foundation, generator mass foundation with dynamic analysis, Pipes, crude oil tanks, pipe support Bridge, design of columns against moving gantry/monorail, pipe support steel brackets & connection design & detailed drawings.
    • Well familiar with bomb blast loading criteria & considered in the structures as recommended by American & British codes.
    • Preparing preliminary design of structures, provide financial proposal with expected quantity to assist the QS/bidding department at bidding stage of consultancy tender.
    • Ability to manage, supervise & lead the team of engineers/Auto-cad draughtsman’s to produce high quality design calculation document & drawings complying with project requirements & delivers projects within completion time frame & within budget.
    • Strong commercial & contractual awareness. Attending & actively involved in the contractual & technical meeting with consultants & client.
    • Liaise with QS for preparing scope of work, specifications & tender documents, to meet design requirements & project specific requirements.
    • Evaluate contractor’s bids & prepare report & recommendations to client.

    From August 1995 – May 2003
    AA Associates Consulting engineers & planners Karachi, Pakistan (
    Working as senior design engineer-Highway Bridges & Industrial structures,

    • My responsibilities included but not limited to produce preliminary, concept & detailed design of industrial plants, highway bridges, flyovers, underpasses, power plants, cement manufacturer plants, high-rise buildings, design supervision, preparation of design criteria, design & layout preparation including complete structural systems & components of a company projects with all related facilities,
    • Preparation & reviewing of structural steel new & existing railroad bridge’s detailing of San Francisco, California, U.S.A,
    • Design of post-tension I-girders, U-shape girders, Composite deck slabs & Single & double cell post tension box girders, deep retaining walls, wing walls, abutment walls, approach slab & deck slab,
    • Working as a team member in the designing & preparing detailed design drawings of preheated structures, silo roofs, conveyors & transfer stations of cement manufacturer plants.
    • Mill buildings of coal firing system of cement plants.
    • Preparation of design specification, technical coordination internally with other departments, contractors & client,
    • Lead & provide technical advice to project design teams,
    • Review of all structural works including design calculation, design & shop drawings, review of material test results,

    Working on International steel & concrete Bridges
    My responsibly to lead the team of engineers & CAD-Draughtsman’s in Preparing the erection &
    -fabrication drawings including advanced material list, erection, & fabrication plans, Bolts list &
    -assess the quality of drawings as per client requirements.

    Some of the relevant prominent works are:
    Seismic retrofitting of bridges in San Francisco, California, U.S.A,
    Richmond-San Rafael Bridge (RSRB) seismic retrofit (City of San Francisco) U.S.A,
    San Francisco-Oakland Bay Bridge (SFOBB) Seismic retrofit of west span,

    The structural steel detailing of the retrofit work was carried with joint venture of contractors, Tutor
    -Saliba, Koch Skanska & Tide water. The work includes steel towers.

    • New dual eccentrically braced frame at the taller, two leg towers of the existing bridge.
    • New dual, special frames resisting frame at the shorter, two legged towers of the existing bridge.
    • New two eccentrically braced frame in transverse & four in longitudinal direction.
    • New transfer beams or steel collars at the tops of all eccentrically braced & moment resisting frames
    -to transfer the lateral loads from the existing truss shoes, bolted to the top of the existing columns to the new ductile frame. It also includes the connection between the truss bearing shoes & the tops of all the steel towers.
    • Floor beam end connections at each truss vertical.
    • Deck expansion joint & isolation bearings.

    Bridge structures completed.
    • Rashid Minas Road Flyover Karachi city Pakistan.
    Working as a team member in the design of prestress concrete girders for Karachi development–authority, Pre-stress concrete girders with reinforced concrete deck slab, dual bridge each 2 lane. Railway spans prestress concrete inverted-T composite deck. Substructure reinforced concrete piers and abutments. This flyover is multi overpass on a rail track and 6 lane dual carriageway roads. Total Length of bridge was 1700m.

    • Shah Faisal colony Bridge Karachi city Pakistan.
    This bridge was 244 m long over bridge proposed to be provided over graded separated crossing of shara-e-faisal & railway main track near shara-e-faisal Karachi Pakistan. The overall bridge width was 14.9m wide. My responsibilities included designing superstructure precast, prestress concrete girders with cast in situ reinforced concrete deck slab & the substructure includes bored cast in place piles with R.C piers & transoms.

    • Khairabad, near Islamabad Bridge
    Working as a team member in the design of large bridge over river Indus at khairabad near Islamabad on additional carriageway from chablat -Nowshra, (N-5) is now open for traffic.
    The bridge is 701 m long (including 1.2 m foot path on either side) with 6 spans of 39+40+111+200+200+111m) and its design is based on cantilever box girder supported on central pier.
    The average height of bridge deck from ground floor & high flood level is 34 m & 13 m respectively. The substructure of the bridge consists of bridge consists of pile foundation resting on group of 900 mm concrete cast in place piles, high piers supporting the cantilever, This bridge design by AA Associate, Pakistan consulting firm & Sachal engineering works as Pakistani contractor. The span of cantilever was the biggest in the Asia.

    • Bridge over river Indus between larkana & khairpur Sindh province, Pakistan.
    Working as a team member in the detailed design of bridge over river Indus connecting larkana and khairpur districts, the length of the bridge over Indus was 1222m long. The length from N-5 up to the end of the project at the right bank is about 47 km. The length of the road up to the end of the project at right bank of Indus is 8 km.

    • Ghagar- Pattack Bridge Karachi Pakistan
    My responsibilities included in the structural design & preparation of drawing of underpass prestress I-girder & T-section with composite section over railway crossing Karachi. This bridge was in two parts one-under pass & other section over railway crossing. Under pass portion were 30 meter & 1.8 meter deep placed at 2.4 meter distance post-tension girders with 250 thick cast in place reinforce concrete deck slab. The girder stresses & prestress losses were calculated by company own made program & deck slab was design by PIGEUDES CHARTS. There was another portion under railway was composite post tension inverted I-SHAPE girders with cast in situ concrete fill in between girder. Hence girder also working as a form work also because kept in sequence connected their bottom flange with disturbing the railway communication.

    Working on other Bridge Projects Completed

    • Quetta Flyover. Peshawar-Torkham Expressway.
    • Bridge over river Indus for sukkur bypass project.
    • Havellen-Manshera Expressway.
    • Analysis & design of 500 long bridges @ Banaras choke Karachi with prestress I-girders.
    • Analysis & design of 4-span bridge on muree expressway Islamabad (prestress I-girders)
    • Analysis & design of 3 span bridge over KB canal, thatta (prestress I- girders).
    Working on airport & marine structures

    • Lahore airport joint-venture with NES-PAK includes the review of new Lahore airport terminal building with related facilities with all 4-Zones, departure level bridge, rigid pavement,
    • Review of berth 23, 24, 22, 22A design calculation for Karachi airport at west wharf for American president line (APL)/Karachi container terminal limited.

    Karachi Mass transit Metro system
    Worked with the team for analysis & design of underground substations, pedestal steel bridges & wall
    Peers supporting the rail track in the mass transit system project in Karachi Pakistan joint venture
    -with NES-PAK, which is pending due to financial problem?
    Industrial structures completed

    Attock Cement Plant Karachi Pakistan,
    • 3-D detail analysis & design of the reinforced, composite & steel frame with connection of cement plant using STAAD-PRO, SAP90 & excel worksheets. Welded, Bolt & riveted shear & moment resisting connections, Column & beam splices, steel staircase for the following cement plant structures.
    Lime stone crusher building
    Kiln Piers.
    Cement Proportioning Station
    Raw Material Proportioning Station
    Hoppers, conveyors steel plate forms and tunnels.
    Pipe Support Bridge
    Cherat Cement plant Nowshra NW.F.P Province Pakistan,
    • Detail analysis & design the following RCC frame Mill foundation, Coal Mill, & steel structural Coal storage shade gable frame foundations of cement plant using STAAD-PRO, SAP90& excel worksheets for the design of platforms, Bolted & welded shear & moment resisting connections, Column & beam splice, steel staircase & design the following structures.
    Working on the other following Cement Plants completed.
    Lucky cement plants Karachi,
    Fuji cement plant at Jhang Khatak Pakistan,
    Dewan Pakland Cement Plant, Sindh Pakistan,
    D.G Khan Cement plant at Kalarkar N.W.F.P Province Pakistan,

    • Friendship Textile Mill included the Structural analysis, design & preparation of design drawings of 8-story, occupied with heavy chillers at most of the floors area & mezzanine floors of steel structural picked up from reinforced concrete floors. The other main thing with structural point of view was that, it was large span structure about 18 meter span of beams, hence due to heavy load & for controlling deflection, it was decided to cast beams as post tensioning concrete & slab as cast in place reinforced concrete.

    • Structural design & preparation of drawings of Basement + G+10 story bachelor accommodation for GOOD WILL TEXTILE MILL at Karachi Pakistan. For design point of view, it was interested thing that basement of the building was design as underground sweet water tank, which supplying to whole factory & ground floor was design for water treatment plant purpose & all other floors were design for bachelor’s accommodation.

    • Anode Power Generation Plant Korangi Karachi: included the structural analysis, design & preparation of design drawings. The project consists of main large span building with crane/gantry facility at ground floor running along steel girders supported on corbels from main columns of the building. The project occupied with heavy generators, hence its mass foundation was design for self weight and during operation rotating torque get from mechanical supplier on their fixing points with foundation. This was models on STAAD as solid element and was checked stability and natural frequency with allowable given by supplier. This project was also occupied with H.F.O & L.F.O oil storage circular steel tanks, for which we were, designed the supporting foundation wall with strap footing all around wall & provide channel all around wall in case of oil tank overflow & oil go through this channel and safe at sump pit near oil tank.

    • Structural design & preparation of clinker tower with steel silos at each floor for Fuji Foundation Cement Plant. The tower was G+10 supported on four columns frame structure with group pile foundation under the column. The structure was consists of deep beam about 2.5 meter deep and 600 mm thick slab. The structure was opened all around & having about 700 to 800 KN working & shocking point load due to thick stone falls from silos from one floor to other floor with pressure on each fixing point with deep beam & with thick slab. The wind load were considered on structure itself and silos also to transfer through rigid beams & slab as diaphragm on columns & foundation. The building were available in seismic ZONE 2-B.

    Structural design & preparation of drawings of SAPHIRE TEXTILE weaving & spinning mill at Lahore Pakistan. The structure was single story with 25 meter span, provided with 2.5 meter inverted beams and supply air reinforcement concrete ducts over roof slab.

    Design of foundation system for reliance manager phase-11 refinery project
    Design of tank foundation & ring beam calculation AGD-111 project
    Design of steel pipe racks for OGDC-111 project,

    Mix-use Projects completed.
    Modeling, analysis & design of 52×100 ft steel roof truss at cadet College larkana.
    Modeling, analysis & design of 12 story apartment at Lahore.
    Modeling, analysis & design of golf club building for Pakistan army at Lahore.

    Other Textile Mills, Sugar Mills & power plants projects Completed.
    Analysis & Design the large span inverted beam & slab cast-in-place concrete& pre-engineered steel shade system foundations

    Artistic Denim Mill
    Dewan Farouque Spinning Mill Lahore
    Nishat Textile Mill
    Friend ship Textile Mill Bikkhi
    Yunus Textile Mill
    Good will textile Mill

    From May 2003 – Feb 2008
    DAR AL Riyadh engineering Consultants Riyadh K.S.A (
    Working as senior bridge design engineer,

    • Design & supervision of various concrete bridges in Saudi Arabia
    • Mecca central ring road (USD 240 Million) & Mecca ring road extension (USD 180 Million).Posttensiong concrete box section with spans of between 30 to 35 m.
    • Six post-tension concrete bridges continuous over 5 or 6 spans of 30 m each @ Mina Makah KSA.
    • Two bridges each on twin superstructure across a deep drainage valley, one 450 m & one 650 m in length at uraijah Muzhamiyah KSA.
    • 8 km of precast, epoxy glued & post-tension segmental concrete bridges.
    • Supervising the Jeddah bypass bridges project in Saudi Arabia, 13 wadi bridges & 22 interchanges bridges in reinforced & posttensiong concrete.

    High-rise Buildings completed

    • Design & prepare the design calculation of AL-AJLAN TWIN TOWER to ensure the overall stability of structure & submitted to consultant for final approval. The building contained 4-Basement+Ground+14 Stories reinforcement concrete & upper roof of steel structure to maintain the architectural elevation.

    • Leading role to the design team of DALLAH HOSPITAL TOWER (G+ B4+14) in Riyadh, kingdom of Saudi Arabia. The building consisted of waffle slab & flat slab @ junction of column.

    • Design of AL-OTHAIM SHOPING MALL, (G+B2+2) in Al-Rabwah, Riyadh, kingdom of Saudi Arabia. The building consisted of Pre-cast Hollow core slabs, beams, pre-cast shear wall designed, supply & manufactured by AL-RASHID ABETONG Precast Co. My involvement in this project was to design of foundation on the base of AL-RASHID axial loads & moments, basement 11 meter high counter-fort retaining wall, underground tank & corbel from retaining wall to support hollow core slab at end.

    From March 2008 –Feb 2010
    WS ATKINS Sharjah office U.A.E (
    (Planning, Engineering design & Management services Consultants)
    Working as Senior Structural Engineer-Team leader

    • My responsibilities included but not limited to supervise the design team, internally review the design done by other Atkins branch office to assess technically & quality of calculation as per company standard, specialized design production, preparation of design criteria, design & layout preparation including complete structural systems & components of a company project’s with all related facilities, production of preliminary, concept & detailed design & coordination with other department, contractors & client.

    • Preparation design criteria, preparation of technical/feasibility report, Review of all structural works including materials.

    • Team leadership on specific projects,

    • Technical advice to project design teams,

    • Preparation design criteria, preparation of technical/feasibility report, Review of all structural works including materials.

    Job responsibilities

    Following are my job responsibilities but not limited to,

    Worked on the following Projects

    • Dubai Metro Project: Working as team leader to the design team on review Dubai metro project for complete design of wall peers, post-tension decks & substations,

    • Shahid tower Kuwait
    Preliminary analysis & design for 36 story slender high/width ratio, cost evaluations of different slab system including PT slab, 3 at Kuwait, Architect design KEO International Doha office & Atkins was the design consultant.

    • Dubai mix used development (DMUD): Residential towers consists of (B+G+Mezz+53) stories situated near sheikh zaid street. The tower is provided with the central core to resist the lateral loads & few peripheral columns are provided. My task was to proportion the super structural elements, check the stability & design the elements.

    Cardiac Hospital 200 Bed-Manama Bahrain
    • Analysis, design, drawings & preparation of design criteria of seven stories 200 bed cardiac hospital at Manama Bahrain. The main frame 4-story structure was RCC & Steel composite section.

    AL-Areen Downtown beloved Hotel Bahrain
    • Review & rechecked of calculation & drawings as a independent designer of building type 6/5B1, 6/2B1, 6/2B2 of Al-Areen Downtown boulevard Hotel Bahrain project at sea view Bahrain designed by Atkins Bahrain to ensure the calculation quality Procedure as per ATKINS standard

    • Review & internal rechecking of calculation & drawings according to international standard & quality of main building of Arcapita headquarter building Bahrain project designed by Atkins Bahrain team.

    • To prepare the detail design calculation & drawings of ancillary services sewage intake pump station for the Durrat al Bahrain resort project for treatment of sea water.

    • Review & coordination of Education building, supreme education council Doha, Qatar.

    • Review & coordination of wall of knowledge, Supreme education council Doha, Qatar.

    • Review & coordination of 10 story car parking building (chiller yard & substation area) Doha.

    • Design & drawings review of power plant at New Doha international airport CP-15 submitted by EL-SEIF contracting company.

    • Review of design & drawings of Supreme education council (SEC) car park building at Doha Qatar design by KEO International consultant.

    • New Doha international airport: Member of the design team, reviewing the design calculation & shop drawings of the world largest aircraft maintenance hangar and supporting facilities buildings at Qatar airport, worked with the design team of GHAPHARI Associate California U.S.A, reviewed by Atkins Qatar, Halcrow and finally submitted to client’s representative supervision & management consultant BACHTEL Incorporated (O.B.I) for the final approval.

    March 2010 –Till date
    DAR AL RIYADH engineering consultant K.S.A (
    Working as Lead structural engineer-Civil & structural,

    Job responsibilities

    My responsibilities included but not limited to,

    • Lead the design production team, reviewing & approve the contractor’s design to ensure that the structural design calculation, shop drawings & method statement are accurate as per contract drawings (IFC) & specification

    • Liaising with the contractor during their design development, review modifications in design to ensure they comply with the client’s requirement given in the specification & project design criteria.

    • Maintain job records, structural design reports & structural related material documents.

    • Review; evaluate the soil investigation report, concrete mix design, concrete core test results, concrete cylinder/cube strength test results, plate load test results & sand cone compaction tests results submitted by third party through main contractor.

    • Review & comments over the concrete mix design, mass concrete, and their temperature control criteria, concrete core test if required when strength not achieved at 28 days submitted by concrete supplier through main contractor.

    • Conduct site visits & provide technical back-up for the site supervision & construction team on difficult matters.

    • Attending weekly technical, progress & coordination meetings to discuss technical, design & site issues with main contractor, sub contractor & owner representative,

    • Overview the projects ensuring works carried out to as per client requirements, programmed & within budget,

    • Technical advice to project design teams,

    Currently working on the following prestigious projects of Saudi Arabia:

    ITCC (Information & technology complex center project) Riyadh Saudi Arabia,
    • This project is undergoing in the supervision of Dar al Riyadh engineering consultant, consists of four towers of (5B+20)-Stories & five supporting buildings of 7-story including but not limited to reviewing design, material submittal, method statement review & shop drawings review as submitted by contractor & supervision of construction work at site. This project awarded to AL-Rajhi as main contractor & main designer is zuhair Faiz & partener & Hamney Parson as a project management -consultant. The total cost of project under the scope is 2.8 BSR.

    King Abdullah Financial District city (K.A.F.D) Riyadh Saudi Arabia,
    • High-rise two towers (Office building) & (Five star hotel building) both of 4B+G+32 & other tower 4B+G+52 stories-King Abdullah financial district (KAFD) Project, near Dallah Hospital is the prestigious project of Saudi Arabia design by BuroHapold & main contractor is Saudi Bin-law din (SBG)group. Dar al Riyadh consultant working as a supervision consultant & MEINHARDT Singapore is the project management consultant.


    Civil & structural Engineering soft wares

    • STAAD PRO 2007
    • CSI SAP 2000 V.14
    • CSI ETABS V.9.3
    • CSI SAFE V.12.3
    • Builder Section for section prosperities,
    • PCA-programs series
    • LEAP, CONBOXV7.0.1
    • AUTO CAD, Excel worksheets.
    General Purpose
    • Windows Xp / Vista
    • MS Office 2003 / 2007
    Codes & standards
    • ACI-318-2008, IBC2006, API-RPI, AWS, ASCE, ANSI, AISC-ASD & LRFD, PCI, UBC97, ASHTO-LRFD, BS8110, BS5950, BS5400, PCI-Standard, Saudi- Armco standards.

    Read, write, speak and understand following languages very well

    • English
    • Arabic
    • Urdu
    • Sindhi


    Life membership of Pakistan Engineering Council (Civil-17860)
    Member of American Concrete institute (ACI)
    Member of Council of tall buildings urban habitats (CTBUH)
    Member of instuite of American posttensiong instuite (PTI)

    • Secured first position in M.E program (G.P.A 3.42/4 passed with honors) in year 2000.
    • Award under top 20 position in the university in bachelor degree with 81% in year 1995
    • Quaid-e-Azam Muhammad Ali Jinnah trust scholarship during bachelor course.

Add Comment

Required fields are marked *. Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.